Fronts in a painted finish

The painted fronts are spray painted in a gloss 20, except PROFILE in a gloss 10, leaving them with a matte finish, while still being easy to clean.

Please take care to avoid bumps and scratches, as this may result in scratching the paint off. If paint is scraped off, it is irreversable. It may be possible to fill in the scratch with paint in the same colour code as ordered. We recommend either using the colour code from the order and going to your local paint supplier to order a small paint sample to use for the minor repair. For an older order where the colour has aged it may be a good idea taking a smaller front to your local paint supplier for a paint scan to find the correct colour code.

Cleaning should be done with a soft cloth wrung in warm water with a mild detergent. Remember to finish by wiping off with a dry soft cloth.

- Although very resistant, the painted surface must still never be treated with products containing abrasive substances, macro abrasive sponges or unsuitable materials such as sandpaper or steel wool
- strongly acidic or alkaline products should be avoided because they can stain the surface
- bleach and heavily-chlorinated products should be avoided because they can degrade the surface.
- do not use furniture polishes or wax-based cleaners in general, because they tend to form a sticky layer on the surface that attracts and traps dirt
- do not use metal scrapers, iron brushes or any other metal tool to remove stains, paint, plaster or other substances from the surface.